GEO S1210

GEO S1210 PRODUCT FEATURES
Components HF: 1x 3” voice coil, 1.4” throat 16Ω driver on a 5° hyperboloid reflective wavesource.
MF/LF (front-firing): 1x 12” (30cm) high excursion neodymium 16Ω driver.
Height x Width x Depth 344 x 674 x 378 mm (13 1/2” x 26 1/2” x 14 7/8”) excluding accessories.
Rigging axis to axis height: 345mm (13 1/2”)
Shape 10° Trapezoid
Weight net 28.05kg (61.8 lbs) including array assembly system.
Connectors 2x NL4MP SPEAKON 4-pole (In & Through)
Construction Baltic Birch ply with structured black coating.
Front finish Molded Dark Grey Metal Grill.
Flying points Two plates connecting with external accessories.Intercabinet angle adjustments = 0.2°, 0.315°,
0.5°, 0.8°; 1.25°, 2.0°, 3.15°, 5°, 6.3°, 8.0°, 10.0° (logarithmic steps)
SYSTEM SPECIFICATIONS GEO S1210
Frequency response [a] 53Hz – 19kHz ±3dB
Usable range @-6dB [a] 50Hz – 20kHz
Sensitivity 103dB SPL nominal
Peak SPL @ 1m [b] Configuration dependent [d]
Dispersion [c] Coupling Plane: Configuration dependent [d] Non-Coupling Plane: Configurable 80° / 120°
Crossover frequency LF- HF: 1.1kHz Passive or Active (internally configurable)
Nominal impedance 16Ω
Recommended amplifiers
3x GEO S1210 in parallel HF: 875 to 1550W into 4Ω LF: 1750 to 3100W into 4Ω
4x GEO S1210 in parallel HF: 1000 to 1800W into 4Ω LF: 2000 to 3600W into 4Ω
6x GEO S1210 in parallel HF: 1650 to 3000W into 2Ω LF: 3300 to 6000W into 2Ω
SYSTEM OPERATION
Electronic Controller NEXO TDcontroller presets are precisely matched to GEO S12 Series cabinets and include
sophisticated protection. Using GEO S12 Series cabinets with improperly connected TDcontrollers
will result in poor sound quality and can damage components.
Array Design Arrays of less than 4x GEO S1210 will provide poor dispersion control and neither recommended
nor supported.
Sub-Bass RS15 / CD18 / GEO SUB / S2 extend system low frequency response down to 35Hz / 32Hz /
38Hz / 32Hz.
Speaker Cables Active: 1-/1+:LF; 2-/2+: HF / Passive: 1-/1+: Not Connected; 2-/2+:LF + HF.
Rigging System Please refer to the GEO S1210 User Manual before operation.
LIMITED WARRANTY
NEXO loudspeakers and electronics are covered against defects in workmanship or materials for a period of two (2) years from the original date of
purchase. At the option of NEXO the defective item will be repaired/replaced with no charge for materials/labour. The item is to be adequately
packaged and dispatched, pre-paid, to a NEXO authorised distributor/service centre. Unauthorised repair shall void the warranty. The NEXO
warranty does not cover cosmetics or finish and does not apply to any items which in NEXO’s opinion have failed due to used abuse, accidents,
modifications or any type of misuse. All images and text herein are the property of NEXO SA, and deemed accurate, although specifications are
subject to change without notice.
GEO S1210
SHIPPING & ORDERING
Packaging GEO S1210 are packaged individually
Shipping Weight 1x GEO S1210 = 30kg(66.1lbs), 0.15 cu m (5.3 cu ft)

 

GEO S1230

GEO S1230 PRODUCT FEATURES
Components HF: 1x 3” voice coil, 1.4” throat 16Ω driver on a 30° hyperboloid reflective wavesource.
MF/LF (front-firing): 1x 12” (30cm) high excursion neodymium 16Ω driver.
Height x Width x Depth 344 x 674 x 400 mm (13 1/2” x 26 1/2” x 15 1/2”) excluding accessories.
Rigging axis to axis height: 345mm (13 1/2”)
Shape 30° Trapezoid
Weight net 26.8kg (59.1lbs) excluding accessories
Connectors 2x NL4MP SPEAKON 4-pole (In & Through)
Construction Baltic Birch ply with structured black coating
Front finish Molded Dark Grey Metal Grill
Flying points Two plates connecting with external accessories.
Intercabinet angle adjustments = (16°) – 22.5° – 30°.
SYSTEM SPECIFICATIONS GEO S1230
Frequency response [a] 53Hz – 19kHz ±3dB
Usable range @-6dB [a] 50Hz – 20kHz
Sensitivity 103dB SPL nominal
Peak SPL @ 1m [b] 131 to 133dB Peak (for 500 to 900 W RMS Amplifier)
Dispersion [c] Coupling Plane: 28.5° Non-Coupling Plane: Configurable 80° / 120°
Crossover frequency LF- HF: 1.1kHz Passive or Active (internally configurable).
Nominal impedance 16Ω
Recommended amplifiers
3x GEO S1210 in parallel HF: 875 to 1550W into 4Ω LF: 1750 to 3100W into 4Ω
4x GEO S1210 in parallel HF: 1000 to 1800W into 4Ω LF: 2000 to 3600W into 4Ω
6x GEO S1210 in parallel HF: 1650 to 3000W into 2Ω LF: 3300 to 6000W into 2Ω
SYSTEM OPERATION
Electronic Controller NEXO TDcontroller presets are precisely matched to GEO S12 Series cabinets and include
sophisticated protection. Using GEO S12 Series cabinets with improperly connected TDcontrollers
will result in poor sound quality and can damage components.
Array Design Arrays of less than 4x GEO S1210 will provide poor dispersion control and neither recommended
nor supported.
Sub-Bass RS15 / CD18 / GEO SUB / S2 extend system low frequency response down to 35Hz / 32Hz /
38Hz / 32Hz.
Speaker Cables Active: 1-/1+:LF; 2-/2+: HF / Passive: 1-/1+: Not Connected; 2-/2+:LF + HF.
Rigging System Please refer to the GEO S1230 User Manual before operation.
LIMITED WARRANTY
NEXO loudspeakers and electronics are covered against defects in workmanship or materials for a period of two (2) years from the original date of
purchase. At the option of NEXO the defective item will be repaired/replaced with no charge for materials/labour. The item is to be adequately
packaged and dispatched, pre-paid, to a NEXO authorised distributor/service centre. Unauthorised repair shall void the warranty. The NEXO
warranty does not cover cosmetics or finish and does not apply to any items which in NEXO’s opinion have failed due to used abuse, accidents,
modifications or any type of misuse. All images and text herein are the property of NEXO SA, and deemed accurate, although specifications are
subject to change without notice.
GEO S1230
SHIPPING & ORDERING
Packaging GEO S1230 are packaged individually
Shipping Weight 1x GEO S1230 = 30kg(66.1lbs), 0.15 cu m (5.3 cu ft)