GEO S805

GEO S805 PRODUCT FEATURES
Components LF 1x 8” (20cm) Neodymium Hi-flux 16Ω Driver
HF: 1x 1” Throat Neodymium Driver on a Hyperboloid Reflective Wavesource
Height x Width x Depth 406 x 250 x 219mm (16” x 9 7/8” x 5 5/8”)
Shape 5° Trapezoid
Weight 13kg (28.6lbs) net
Connectors 2x NL4MP 4-pole SPEAKON (In & Through)
Construction Baltic Birch Ply finish with structured black coating.
Dark grey carpet is optional.
Fittings Grill Perforated Steel
Flying Integral flying system. Intercabinet Angle Adjustments = 17.5° & 30°
SYSTEM SPECIFICATIONS GEO S805 WITH NX242 TDCONTROLLER
Frequency Response [a] 67Hz – 19kHz ± 3dB
Usable Range @-6dB [a] 60Hz – 20kHz
Sensitivity 1W @ 1m [b] 99dB SPL Nominal -97dB SPL Wideband
Peak SPL @ 1m [b] Configuration dependent [d].
Dispersion [c] Configuration dependent [d].
Non Coupling Plane 120° (configurable to 80°).
Directivity Index [c] Not usable as a single cabinet. Configuration dependent [d].
Crossover Frequency 1.6kHz Passive
Nominal Impedance 16Ω
Recommended Amplifiers 1500 to 3000Watts into 4Ω / 4x cabinets per channel. Up to 6x cabinets per channel
may be connected to large amplifiers capable of operating into low impedance loads.
SYSTEM OPERATION
Electronic Controller The NX242 Digital TDcontroller presets are precisely matched to the GEO S8 Series
cabinets and include sophisticated protection systems. Using GEO S8 Series cabinets
without a properly-connected NX242 Digital TDcontroller will result in poor sound quality
and can damage components. The GEO S805 & S830 can be used without the optional
CD12 Hypercardioid Sub. In this case the NX242 can be used in stereo. With the CD12
Hypercardiod Sub, each Sub channel requires two NX242 outputs and the NX242 will
operate in mono.
HF Dispersion Configuration After release of the front grill from its fittings, the HF Waveguide can be configured
for 80° or 120° dispersion in the non-coupling plane.
Array Design S805 and S830 cabinets, having tangent waveguides, can be mixed in the same array.
Minimum configuration for Vertical Tangent Arrays is 5x S805 & 1x S830 (4x S805 for
paging applications only). CD12s are optional. A a ratio of 1x CD12 per 3x full-range GEO
modules is required for proper subbass output.
Speaker Cables The GEO S805 and S830 are wired 1- & 1+ on both Speakon connectors, 2- & 2+
are not connected.
Rigging System Please refer to the GEO User Manual before any operation.
SHIPPING & ORDERING
Packaging S830s are packaged in pairs.
Shipping Weight & Volume 2x S830s: 29.2kg (64.2 lbs) 0.135 cu m (4.8 cu ft)

 

GEO S830

GEO S830 PRODUCT FEATURES
Components LF 1x 8” (20cm) Neodymium Hi-flux 16Ω Driver
HF: 1x 1” Throat Neodymium Driver on a Hyperboloid Reflective Wavesource
Height x Width x Depth 406 x 250 x 219mm (16” x 9 7/8” x 5 5/8”)
Shape 30° Trapezoid
Weight 13kg (28.6lbs) net
Connectors 2x NL4MP 4-pole SPEAKON (In & Through)
Construction Baltic Birch Ply finish with structured black coating.
Dark grey carpet is optional.
Fittings Grill Perforated Steel
Flying Integral flying system. Intercabinet Angle Adjustments = 17.5° & 30°
SYSTEM SPECIFICATIONS GEO S805 WITH NX242 TDCONTROLLER
Frequency Response [a] 67Hz – 19kHz ± 3dB
Usable Range @-6dB [a] 60Hz – 20kHz
Sensitivity 1W @ 1m [b] 99dB SPL Nominal -97dB SPL Wideband
Peak SPL @ 1m [b] Configuration dependent [d].
Dispersion [c] Configuration dependent [d].
Non Coupling Plane 120° (configurable to 80°).
Directivity Index [c] Not usable as a single cabinet. Configuration dependent [d].
Crossover Frequency 1.6kHz Passive
Nominal Impedance 16Ω
Recommended Amplifiers 1500 to 3000Watts into 4Ω / 4x cabinets per channel. Up to 6x cabinets per channel
may be connected to large amplifiers capable of operating into low impedance loads.
SYSTEM OPERATION
Electronic Controller The NX242 Digital TDcontroller presets are precisely matched to the GEO S8 Series
cabinets and include sophisticated protection systems. Using GEO S8 Series cabinets
without a properly-connected NX242 Digital TDcontroller will result in poor sound quality
and can damage components. The GEO S805 & S830 can be used without the optional
CD12 Hypercardioid Sub. In this case the NX242 can be used in stereo. With the CD12
Hypercardiod Sub, each Sub channel requires two NX242 outputs and the NX242 will
operate in mono.
HF Dispersion Configuration After release of the front grill from its fittings, the HF Waveguide can be configured
for 80° or 120° dispersion in the non-coupling plane.
Array Design S805 and S830 cabinets, having tangent waveguides, can be mixed in the same array.
Minimum configuration for Vertical Tangent Arrays is 5x S805 & 1x S830 (4x S805 for
paging applications only). CD12s are optional. A a ratio of 1x CD12 per 3x full-range GEO
modules is required for proper subbass output.
Speaker Cables The GEO S805 and S830 are wired 1- & 1+ on both Speakon connectors, 2- & 2+are not connected.Rigging System Please refer to the GEO User Manual before any operation.

SHIPPING & ORDERING
Packaging S830s are packaged in pairs.
Shipping Weight & Volume 2x S830s: 29.2kg (64.2 lbs) 0.135 cu m (4.8 cu ft)