PS10-R2 LOUDSPEAKER PRODUCT FEATURES
Components 1 x 10″ (25cm) Shielded Neodymium 8Ω driver.
HF 1 x 1″ throat driver + Low Distortion Constant Directivity Asymmetrical Dispersion Horn.
Height x Width x Depth 515mm x 316mm x 277 mm (20.28″ x 12.44″ x 10.91″).
Weight 14 kg (31 lbs).
Connectors 2 x NL4MP Speakon 4 pole.
Construction Baltic Birch Ply finished with textured black coating.
Fittings 2 Metal recessed pockets.
Front finish Moulded Dark Grey Metal Grill.
Flying Points One plate connecting with external accessories.
Stand fittings Built in Steel Stand Fitting, (35mm / 1 3/8″).
SYSTEM SPECIFICATIONS PS10-R2 with PS10 TDController-R2
Frequency Response [a] 65 Hz – 20 kHz ±3dB.
Usable Range @-6dB [a] 58 Hz – 21 kHz.
Sensitivity 1W @ 1m [b] 99 dB SPL Nominal – 97 dB SPL Wideband.
Nominal Peak SPL @ 1m [b] 129 to 132 dB Peak.
HF Dispersion [c] 50° to 100° Hor. x 55° Vert. Rotatable Horn, 4 positions.
Directivity Q & DI [c] Q : 16 Nominal DI : 12 dB Nominal.
( f > 3 kHz )
Crossover Frequencies 2 kHz Passive.
Nominal Impedance 8Ω
Recommended Amplifiers 500 to 1250 W / 8 Ω.
Electronic Controller The PS10 TDController-R2 is precisely matched to the PS10-R2 & LS600 cabinets and includes
sophisticated protection systems. Using PS10-R2 & LS600 without a properly connected PS10
TDController-R2 will result in poor sound quality and can damage the components.
Dispersion configuration After dismounting front grill from its fixings, the HF Horn can be rotated in 4 positions for dispersion
Sub-bass The PS10-R2 can be used without optional LS600 Sub-Bass. Active two-way operation with the
LS600 is included in the PS10 TDController-R2. One LS600 matches 2 x PS10-R2, additional LS600
may be used for enhanced LF capability.
Speaker Cables PS10-R2 are wired 2- & 2+ on Speakon connectors, LS600 on 1- & 1+. Loop through Speakons are
present on both. Single identical cables can thus be used to loop through combinations of up to 2 x
PS10-R2 & 1 x LS600 in no particular order.
NEXO loudspeakers and electronics are covered against defects in workmanship or materials for a period of two (2) years from the original date of
purchase. At the option of NEXO the defective item will be repaired/replaced with no charge for materials/labour. The item is to be adequately
packaged and dispatched, pre-paid, to a NEXO authorised distributor/service centre. Unauthorised repair shall void the warranty. The NEXO
warranty does not cover cosmetics or finish and does not apply to any items which in NEXO’s opinion have failed due to used abuse, accidents,
modifications or any type of misuse. All images and text herein are the property of NEXO SA, and deemed accurate, although specifications are
subject to change without notice.
SHIPPING & ORDERING SPECIFICATIONS
Packaging PS10-R2 is packaged as a single product.
Shipping Weight & Volume 17.3 kg (38 lbs) / 0.169 cubic metres (5.96 cubic feet).
Accessories A full selection of mounting Accessories is available, please contact your Nexo Agent for details.