PS15-R2 LOUDSPEAKER PRODUCT FEATURES
Components LF 1 x 15″ (38 cm) long excursion Neodymium 8Ω driver.
HF 1 x 2″ throat, 3″ Titanium diaphragm compression driver + Low Distortion,
Constant Directivity Asymmetrical Dispersion Horn.
Height x Width x Depth 675 x 434 x 368 mm (26.57″ x 17.08″ x 14.48″).
Weight 28 kg (62 lbs).
Speakon Connectors 2×4 pole in & loop thru (switch passive to active inside).
Construction Baltic Birch Ply finished with textured black coating.
Fittings Handles 2 metal recessed pockets.
Front Finish Moulded dark grey metal grille.
Flying Points Two plate connecting with external accessories.
Stand fittings Built in steel stand fitting (35mm / 1 3/8″).
SYSTEM SPECIFICATIONS PS15-R2 with PS15 TDController-R2
Frequency Response [a] 50 Hz – 18 kHz ±3 dB.
Usable Range @-6dB [a] 47 Hz – 18 kHz.
Sensitivity 1W @ 1m [b] 102 dB SPL Nominal / 99 dB SPL Wideband.
Nominal Peak SPL @ 1m [b] 133 to 136 dB Peak.
HF Dispersion [c] 50° to 100° Horizontal x 55° Vertical Rotatable Horn, 4 positions.
Directivity : Q & DI [c] Q : 16 Nominal / DI : 12 dB Nominal ( f > 1.5 kHz ).
Crossover Frequencies 1.1 kHz Passive or Active (internally switchable).
Nominal Impedance Passive 8Ω or Active LF 8Ω, HF 16Ω.
Recommended Amplifiers Passive 1000 to 2000 W 8Ω. Active LF 1000 to 2000 W 8Ω / HF 250 to 500 W 16Ω.
Important: Active mode only available on NXAMP.
Electronic Controller The PS15TD Controller-R2 is precisely matched to the PS15-R2 & RS15 cabinets and includes protections.
Using PS15-R2 & RS15 without a properly connected PS15 TDController-R2 will result in poor sound quality
and can damage the components.
Dispersion configuration After dismounting the front grille from its fixings, the HF Horn can be rotated in 4 positions for dispersion
Sub-bass The PS15-R2 can be used without optional RS15 Sub-bass. Active two-way operation with RS15 is included
in the PS15 TDController-R2. One RS15 matches 2 x PS15-R2, additional RS15 may be used for enhanced
Speaker Cables PS15R2 are wired 2-/2+ on Input Speakons in Passive Mode. PS1R25 are wired LF 1-/1+ & HF 2-/2° on
Input Speakons in Active Mode. Please refer to RS15 User Manual for RS15 for RS15 connection.
NEXO loudspeakers and electronics are covered against defects in workmanship or materials for a period of two (2) years from the original date of
purchase. At the option of NEXO the defective item will be repaired/replaced with no charge for materials/labour. The item is to be adequately
packaged and dispatched, pre-paid, to a NEXO authorised distributor/service centre. Unauthorised repair shall void the warranty. The NEXO
warranty does not cover cosmetics or finish and does not apply to any items which in NEXO’s opinion have failed due to used abuse, accidents,
modifications or any type of misuse. All images and text herein are the property of NEXO SA, and deemed accurate, although specifications are
subject to change without notice.
SHIPPING & ORDERING SPECIFICATIONS
Packaging PS15-R2 is packaged as a single product.
Shipping Weight & Volume 33 kg (72.6 lbs) / 0.2 cubic metres (7 cubic feet).
Accessories A full selection of mounting Accessories is available, please contact your Nexo Agent for details.